Hot 350-501 Questions, 350-501 Cost Effective Dumps

DOWNLOAD the newest Itexamguide 350-501 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1p6RRSFWQ3v_GyvMU6_MiXD8FlxQU0_x6

We offer you free update for 365 days for 350-501 study guide materials, so that you can have a better understanding of what you are going to buy. And update version for 350-501 exam materials will be sent to your email automatically. In addition, 350-501 exam materials are compiled by experienced experts, and they are quite familiar with the exam center, therefore if you choose us, you can get the latest information for the exam We also have online and offline chat service, if you have any questions about 350-501 Study Guide, you can contact with us online or by email, and we will give you reply as quickly as we can.

Cisco 350-501 certification exam focuses on validating one’s skills and knowledge in service provider core networking technologies. Aspiring professionals in network operations and support can utilize this certification to prove their expertise in implementing and operating core service provider network technologies, which ultimately leads to greater professional advancement.

Nowadays, infrastructure, networking, and software have become more and more interrelated. Applications give new experiences, and with well-targeted networking, the service suppliers can use the automation to secure and scale their infrastructure. That is why many IT specialists pass the exams to obtain the certification(s) that will validate their skills. Thus, the CCIE Service Provider and CCNP Service Provider certificates can prove that you know about provider networking: from planning & designing to managing & optimizing. These certifications are presented by Cisco, and to earn them, the individuals have to complete the core test, which is 350-501 SPCOR. Besides that, they will be required to pass one concentration exam of their choice (there are 3 of them for CCNP Service Provider) or one practical lab test (for CCIE Service Provider).

>> Hot 350-501 Questions <<

350-501 Cost Effective Dumps | Valid Dumps 350-501 Sheet

Candidates who don't find actual 350-501 Questions remain unsuccessful in the Implementing and Operating Cisco Service Provider Network Core Technologies (350-501) test and lose their resources. That's why Itexamguide is offering real Cisco 350-501 Questions that are real and can save you from wasting time and money. Hundreds of applicants have studied successfully from our 350-501 latest questions in one go.

Cisco 350-501 exam is a certification test designed to measure the knowledge and skills of professionals who implement and operate Cisco service provider network core technologies. 350-501 exam is a part of the CCNP Service Provider certification and is intended for IT professionals who work with service provider networks. 350-501 Exam covers a wide range of topics, including network architecture, routing protocols, virtualization, and network automation.

Cisco Implementing and Operating Cisco Service Provider Network Core Technologies Sample Questions (Q341-Q346):

NEW QUESTION # 341
Refer to the exhibit.

Refer to the exhibit. A network engineer is implementing multicast services on CPE-1 and CPE-2. CPE-1 must be configured as the preferred IGMP querier for the LAN segment. PIM-SM must be implemented on the LAN interfaces with an IGMP version that supports (*, G) joins only. Which configurations must the engineer implement on CPE-1 and CPE-2?

A. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255.128
ip pim sparse-mode
ip igmp version 2
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 2
B. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 3
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255. 128
ip pim sparse-mode
ip igmp version 3
C. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 2
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255.128
ip pim sparse-mode
ip igmp version 2
D. On CPE-1:
interface GigabitEthernet0/1
ip address 10.0.12.129 255.255.255.128
ip pim sparse-mode
ip igmp version 3
On CPE-2:
interface GigabitEthernet0/1
ip address 10.0.12.130 255.255.255.128
ip pim sparse-mode
ip igmp version 3

Answer: A

NEW QUESTION # 342
After implement MPLS protocol for multiple VRFs on a single Cisco device, the engineer notices all VRFs on the router still do to not LDP session protection feature enabled. Which configuration must the engineer apply to enable the LDP session protection feature FOR LDP neighbors within each VRF?

A. Configure LDP session protection globally on the device and on each neighbor that requires session protection.
B. Configure LDP session protection globally on the device only.
C. Configure LDP session protection within the individual VRFs.
D. Configure LDP session authentication on the device to enable LDP session protection on each VRF automatically.

Answer: C

Explanation:
To enable LDP session protection for LDP neighbors within each VRF, the engineer should configure LDP session protection within the individual VRFs. This ensures that LDP sessions are protected at the VRF level, providing security and stability for MPLS-based services. By enabling LDP session protection within each VRF, the router will take appropriate actions to protect LDP sessions against misbehaving neighbors or potential attacks. References: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) v1.0

NEW QUESTION # 343
Which statement about the Cisco MPLS TE forwarding adjacency feature is true?

A. It enables the MPLS core to use EIGRP as the routing protocol
B. It enables the headend and tailend routers to establish a bidirectional tunnel
C. It enables the Cisco MPLS TE tunnel to be advertised into the running IGP.
D. It enables the tailend router to advertise routes to the headend router over the tunnel

Answer: C

Explanation:
"When the MPLS Traffic Engineering Forwarding Adjacency feature is enabled on a TE tunnel, the link is advertised in the IGP network as a type, length, value (TLV) 22 object without any TE sub-TLV." ...THEN, "You must configure MPLS TE forwarding adjacency tunnels bidirectionally" See section: "Restrictions for MPLS Traffic Engineering Forwarding Adjacency":
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_te_path_setup/configuration/xe-16-6/mp- te-path-setup-xe-16-6-book.pdf

NEW QUESTION # 344
Which action does the ingress VTEP perform on traffic between EVPN VXLAN overlays?

A. routing and tunneling when doing symmetric IRB
B. bridging when doing symmetric IRB
C. routing when doing asymmetric IRB
D. routing and bridging when doing asymmetric IRB

Answer: D

Explanation:

https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-734107.html

NEW QUESTION # 345
FRR is configured on a network. What occurs when the headend router on the path is alerted to a link failure over IGP?

A. Backup tunnel is established and intersects with the primary tunnel at the headend.
B. The headend router uses a presignaled LSP to bypass the failure point.
C. LSP attempts fast switching on the backup path until the primary path returns to the active state.
D. A new backup tunnel is established past the PLR to pass through the protected nodes.

Answer: C

NEW QUESTION # 346
......

350-501 Cost Effective Dumps: https://www.itexamguide.com/350-501_braindumps.html

DOWNLOAD the newest Itexamguide 350-501 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1p6RRSFWQ3v_GyvMU6_MiXD8FlxQU0_x6